Product Description

Radial Spherical Plain Bearing GE160 DO-2RS

More pictures for Radial Spherical Plain Bearing GE160 DO-2RS

 
Feature of Spherical Plain Bearing:
Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds.
 

Specifications
1)Models:GE..E,GE..ES,GE..ES-2RS 
2)Excellent load rating capacity 
3)High quality,good service 
1.Specification
1)Inner Race:Gcr15 Steel,hardness HRC 58-64,surface phosphated.
2)Outer Race:Gcr15 Steel,hardeness HRC 54-60,surface phosphated.
3)Bore size  bigger than 140mm:Inner and outer race are all Gcr15 SiMn.
4)Sliding contact surfaces:Steel/Steel or Steel/PTFE
 
More Part Number of Spherical Plain Bearing GE Series:
 

Type d D B
GE15-DO-2RS 15 26 12
GE17-DO-2RS 17 30 14
GE20-DO-2RS 20 35 16
GE25-DO-2RS 25 42 20
GE30-DO-2RS 30 47 22
GE35-DO-2RS 35 55 25
GE40-DO-2RS 40 62 28
GE45-DO-2RS 45 68 32
GE50-DO-2RS 50 75 35
GE60-DO-2RS 60 90 44
GE70-DO-2RS 70 105 49
GE80-DO-2RS 80 120 55
GE90-DO-2RS 90 130 60
GE100-DO-2RS 100 150 70
GE110-DO-2RS 110 160 70
GE120-DO-2RS 120 180 85
GE140-DO-2RS 140 210 90
GE160-DO-2RS 160 230 105
GE180-DO-2RS 180 260 105
GE200-DO-2RS 200 290 130
GE220-DO-2RS 220 320 135
GE240-DO-2RS 240 340 140
GE260-DO-2RS 260 370 150
GE280-DO-2RS 280 400 155
GE300-DO-2RS 300 430 165

About US:

There are 500 workers in our factory, as the industry demands developed every year, last year we did invest 6 million USD to build expand our factory. As our Europe clients become more and more, most of our equipment and machine are import from Germany, and we did use the Germany Engineer to operate our team. So that we have the world leading technology to produce bearings.

Our main products are ball bearings and roller bearings, we can produce them from small size to big size such as deep groove ball bearing, angular contact ball bearings, spherical roller bearing, cylindrical roller bearing, taper roller bearing, needle bearing. Also we can produce the slide bearings such as pillow block, spherical plain bearing and bearing bush, linear bearing. We have a department special to develop the auto bearings such as wheel hub bearings and clutch bearings, as now the auto bearings have a big market in the worldwide.

Our clients are all over the world such as: Asia, Europe, south American, north American. Also Africa and Australia. Different area have different demands and market, as we have 10 years export experience, we are very familiar with the market in different area.

Also in recently, OEM service become very popular, we did help a lot of customer to do the OEM service. We have a workshop only produce the bearing box, we can produce the box if the customer send us their requirement. So if you want we OEM your brand bearings, we also can help you to design your brand box. 

” Quality to win customer, and good after- sell service to win the regular customer” is our faith. So welcome to send us the inquiry, hope we can be your best bearings partner in China.
 
Please feel free to contact us if you have any demand for our bearings.

US $100
/ Piece
|
1 Piece

(Min. Order)

###

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Self-lubricating
Outer Structure: Whole Outer Ring

###

Customization:

###

Type d D B
GE15-DO-2RS 15 26 12
GE17-DO-2RS 17 30 14
GE20-DO-2RS 20 35 16
GE25-DO-2RS 25 42 20
GE30-DO-2RS 30 47 22
GE35-DO-2RS 35 55 25
GE40-DO-2RS 40 62 28
GE45-DO-2RS 45 68 32
GE50-DO-2RS 50 75 35
GE60-DO-2RS 60 90 44
GE70-DO-2RS 70 105 49
GE80-DO-2RS 80 120 55
GE90-DO-2RS 90 130 60
GE100-DO-2RS 100 150 70
GE110-DO-2RS 110 160 70
GE120-DO-2RS 120 180 85
GE140-DO-2RS 140 210 90
GE160-DO-2RS 160 230 105
GE180-DO-2RS 180 260 105
GE200-DO-2RS 200 290 130
GE220-DO-2RS 220 320 135
GE240-DO-2RS 240 340 140
GE260-DO-2RS 260 370 150
GE280-DO-2RS 280 400 155
GE300-DO-2RS 300 430 165
US $100
/ Piece
|
1 Piece

(Min. Order)

###

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Self-lubricating
Outer Structure: Whole Outer Ring

###

Customization:

###

Type d D B
GE15-DO-2RS 15 26 12
GE17-DO-2RS 17 30 14
GE20-DO-2RS 20 35 16
GE25-DO-2RS 25 42 20
GE30-DO-2RS 30 47 22
GE35-DO-2RS 35 55 25
GE40-DO-2RS 40 62 28
GE45-DO-2RS 45 68 32
GE50-DO-2RS 50 75 35
GE60-DO-2RS 60 90 44
GE70-DO-2RS 70 105 49
GE80-DO-2RS 80 120 55
GE90-DO-2RS 90 130 60
GE100-DO-2RS 100 150 70
GE110-DO-2RS 110 160 70
GE120-DO-2RS 120 180 85
GE140-DO-2RS 140 210 90
GE160-DO-2RS 160 230 105
GE180-DO-2RS 180 260 105
GE200-DO-2RS 200 290 130
GE220-DO-2RS 220 320 135
GE240-DO-2RS 240 340 140
GE260-DO-2RS 260 370 150
GE280-DO-2RS 280 400 155
GE300-DO-2RS 300 430 165

Types of Ball Bearings

If you’re looking to purchase a new ball bearing, there are many different types available. Learn about Single-row designs, Ceramic hybrid bearings, and Self-aligning ball bearings. You can also choose from stainless steel or single-row designs. Then, read about the different types of materials available to you. You’ll have an easier time making a decision. After all, you won’t have to worry about maintaining your new ball bearing, since it will be maintained by your supplier.
bearing

Single-row designs

Ball bearings with a single-row design have a high load-carrying capacity. They are used in applications where high loads must be handled smoothly. A single-row design is a good choice when the material’s properties require high load-carrying capacity but limited axial load capability. Single-row designs use two bearings with similar design features, but they have different mounting methods. Single-row designs can be adjusted either against one another to accommodate axial loads.
The single-row design is suitable for high-speed applications, but also has some disadvantages. The contact angle a is the angle between the radial plane and contact line. The larger the angle, the higher the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are suitable for higher axial forces. Single-row angular contact ball bearings have a single-row design and support high axial forces in one direction. Single-row ball bearings are available in both pressed steel and machined steel cages.
Angular contact ball bearings with a single row feature a cage made of fiber-glass reinforced polyamide 66. These are available in diameters up to 130 mm. Four-point angular contact ball bearings use brass, steel, or brass plate. They have good running properties and a low coefficient of linear expansion. Single-row designs are easy to mount and are widely available. Alternatively, they can be mounted with a universal match design, which allows them to be easily adjusted.
One-row angular contact ball bearings are generally not suitable for angular misalignments because they are unsuitable for compensation of angular misalignments. Misalignments cause internal forces in the bearing which reduce its radial load capacity and life expectancy. This type of bearing is not suitable for adjacent mounting as it increases the chances of misalignment. However, it is a suitable choice for applications where only one bearing is required per bearing position.

Ceramic hybrid bearings

While all-ceramic bearings are limited to very specialized applications, Si3N4-based hybrid bearings are finding use in a wide range of high-speed machines. Compared to steel, ceramics are less susceptible to centrifugal forces, which are directly proportional to the mass of the balls. Because Si3N4 replacement balls have a lower density than steel, these bearings reduce the stress placed on the outer race.
The benefits of hybrid bearings are clear: they allow for higher speeds and loads than full-ceramic bearings, and they require no lubrication. Because of their many benefits, many industrial equipment operators are switching to these innovative bearings. CBR is one company that specializes in ceramic hybrid bearings and can help you find the best product for your application. If you are thinking about purchasing ceramic bearings for your next machine, here are some things you need to know about them.
A ceramic ball bearing surface has an extremely low coefficient of friction, which is important for applications that require low friction and high speeds. Ceramic balls also have a higher hardness than steel balls, which increases their life. In addition to this, ceramic hybrid bearings have superior thermal properties, generating less heat even when spinning at high speeds. These properties make ceramic hybrid bearings an ideal choice for high-speed machinery, especially electric motors. They are also suitable for applications that operate under water.
A ceramic ball hybrid bearing is much less susceptible to temperature fluctuations and wear. Because they are essentially indestructible, ceramic balls do not generate wear particles from the adhesive wear. They can run at significantly higher speeds than steel balls. Ceramic balls are also more resistant to moisture. For this reason, grease is a recommended lubricant in most ceramic bearing applications. These lubricants offer superior protection against moisture and corrosion. Further, they are available in many types.
bearing

Self-aligning ball bearings

A self-aligning ball bearing is one type of self-aligning bearing. These bearings are recommended for use in flex shaft systems. Their self-aligning feature prevents them from misaligning when in use. They can be used in both single and multiple-joint systems. In addition to self-aligning ball bearings, these units also feature flex shafts.
These self-aligning ball bearings come in a variety of configurations, including cylindrical, round, tapered, and straight bore. Their inner ring is tapered to meet specific tolerances. They are suitable for operating temperatures ranging from -30°F to 120°F. Their wide range of applications allows them to be used in general machinery, precision instruments, and low noise motors. In addition, they are available in a variety of outside diameters, widths, and internal clearances.
Self-aligning ball bearings have two rows of balls and one common sphered raceway in the outer ring. This enables them to automatically compensate for angular misalignment, which may be caused by machining and assembly errors or deflections. Compared to spherical roller bearings, these self-aligning ball bearings generate less friction. They run cooler even at high speeds. Self-aligning ball bearings also offer free engineering support.
Self-aligning ball bearings are designed for difficult shaft alignment. They are double-row, self-retaining units, with cylindrical or tapered bores. These bearings are available in open and sealed designs, and can also be used in applications with misalignment. They are also available with an outer ring that rotates in relation to the inner ring. When it comes to shaft misalignment, self-aligning ball bearings are a great solution.

Stainless steel

Stainless steel is a metal that resists corrosion and is highly durable. Its corrosion-resistant and water-resistance properties make it a good choice for bearings in food and marine applications. Additionally, stainless steel has hygienic benefits. Here are some of the benefits of stainless steel ball bearings. Read on to learn more about these amazing bearings! We’ve included some of the most common uses for stainless steel.
Hardness is important in a ball bearing. Steel uses the Rockwell C scale to measure hardness. A grade 25 steel ball bearing is accurate to 25 millionths of an inch, while a grade five ceramic bearing is less than a half-inch round. Although roundness is important, it shouldn’t be overemphasized, as the bearing surfaces may not be as accurate as the grade of the metal. And remember, a higher price tag doesn’t mean a better product.
Stainless steel ball bearings are available in a variety of alloys. The alloys used in manufacturing a stainless steel ball bearing vary in hardness, strength, and ductility. Stainless steel ball bearings have high corrosion-resistance properties. Additionally, they have long lubrication lives. These benefits make them a popular choice for industrial applications. These bearings are easy to maintain, reduce replacement costs, and offer corrosion resistance.
The NTN Sentinel Series is a premium line of stainless steel bearings. The solid lube is NSF H1 registered and prevents grease from leaching into food. It is also corrosion-resistant and doesn’t need to be coated. The seals and slinger create a water-resistant barrier between the steel ball and the lubricant. It also adds safety and security to the bearing.
bearing

Plastic balls

For applications where noise and weight are major concerns, plastic balls are ideal. These non-magnetic balls are ideal for MRI X-ray machines and sensors. They are also easy to lubricate, and are non-magnetic. A polymer ball bearing is the lightest of all three types. This makes them a good choice for many industries. Read on to learn more. This article will introduce some of the advantages of plastic balls for ball bearings.
Although ceramic ball bearings are more durable and offer many advantages, they are more expensive than plastic. Fortunately, plastic ball bearings offer a cheaper alternative. These bearings feature all-plastic races and cages. Depending on the application, plastic balls can be used in applications involving chemicals. In these cases, plastic ball bearings are available with a C160 grade, which is safe for use in temperatures below 176 deg F.
Medical devices often require precision specialty balls, which are made of glass, stainless steel, and plastic. These bearings must meet stringent cleanliness requirements. To meet the most stringent requirements, they must undergo ultrasonic cleaning. These bearings are available in plastic raceways, and are also available with glass or stainless steel balls. Polyethylene balls are lightweight and can be used in a variety of applications. They can be ordered in different sizes and tolerances to meet specific requirements.
Plastic balls for ball bearings are often mounted into other parts, such as plastic wheels, pulleys, and housings. They can be seamlessly integrated into other parts of a machine, which reduces assembly time and improves affordability. One important advantage of plastic bearings is that they are rust-resistant. As such, they can be used in harsh environments without causing any damage. If a piece of equipment is exposed to extreme temperatures, polymers are the ideal choice.

China Radial Spherical Plain Bearing Ge160 Do-2RS     wholesalerChina Radial Spherical Plain Bearing Ge160 Do-2RS     wholesaler
editor by czh 2022-12-12

Slewing bearings

As one of the slewing bearings manufacturers, suppliers, and exporters of mechanical products, We offer slewing bearings and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of slewing bearings.

Recent Posts